Can't find what you need?
Contact us for any further questions you may have about United Rentals.
Submersible Pumps
- Cat Class:
- PMP-0003
Product description
United Rentals' range of submersible pumps are high-quality, compact, and extremely durable pumps with a relatively low weight.
Submersible pumps, otherwise known as trash pumps, are pumps that can be fully submersed in fluid, and they push fluid to the surface rather than pulling it in, making them more efficient than non-submersible pumps.
- Built-in shaft mounted agitator suspends solids
- Spiral Design and anti-wicking cable entry
- Thermal motor protection
- Dual Inside Mechanical Seal
- Oil Lifter [Patented]
- 10 metre motor lead with Australian 3 pin plug
- Rubber/Resin-made Stand
- Agitator (HS/HSZ/HSD)
- Classification IP 68
- Max submersion 20m
- Cable SUBCAB
- Discharge connection Hose
- SO-G or NPT
- Limitations ph 5-8
- Max liquid temp 40°C
Resources
Product Information
Our range of submersible pumps includes:
- Tsurumi HS2.75S – The Tsurumi HS2.75S is a submersible single-phase portable drainage pump, designed to pump water containing sand, solids, and debris with minimal wear and clogging. It’s side discharge and spiral design allows smoother passage of the sucked solid matters.
- Grindex Sandy N/H – The Grindex Sandy N/H is an electrical submersible one-phase and three-phase pump, ideal for pumping thick, viscous liquid, such as mud, sludge, and light slurry. Due to its patented air valve and electronic protection system, the pump can run dry indefinitely.
These products are only available in select locations. Please contact United Rentals for more information.
Suited for
United Rentals' range of submersible pumps are designed for a number of heavy-duty applications, including:
- Construction dewatering
- Wastewater management
- Industrial applications
- Flood control
- Agricultural use
- Domestic use
Should you require advice we always recommend you speak to our technical sales team before any hire.
Specifications
TSURUMI HS2.75S SPECIFICATIONS
Specifications | |
|---|---|
Bore (mm) | 50 |
Phase | 1 |
Starting Method | Capacitor-Run |
Output (kW) | 0.75 |
Max. Head (m) | 18/19 |
Max. Solid Handling (mm) | 7 |
Max. Capacity (m³/min) | 0.23/0.21 |
Weight (kg) | 19 |
GRINDEX SANDY N/H SPECIFICATIONS
Specifications | 50HZ |
|---|---|
Discharge connection | N: 3” H: 3” |
Rated power P2 | N: 5.6kW H: 5.6kW |
Max. power consumption P1 | N: 6.7kW H: 6.7kW |
Shaft speed | N: 2890rpm H: 2890rpm |
Rated current 1 | N: 19A at 230V H: 19A at 230V |
Rated current 2 | N: 11A at 400V H: 11A at 400V |
Rated current 3 | N: 8.7A at 500V H: 8.7A at 500V |
Solids passage | N: 46mm H: 32mm |
Height | N: 867mm H: 867mm |
Diameter | N: 320mm H: 320mm |
Width | N/A |
Weight | N: 56kg H: 56kg |
